Combined Humidity / Temperature Probe DKRF505
The DKRF505 comes with a detached probe head which enables it to be used within an enhanced temperature range compared to its sibling models. In addition, it can be used to measure in hard to reach spots, where a longer HumiProbe model could not be installed.
Smart Calibration Concept
We recommend calibrating your HumiProbes every 12 months. Calibration can either be done on site or you can send in your probes to our calibration laboratory.
It can be even easier, cheaper und much more convenient with models DKRF500, DKRF505 and DKRF515 thanks to user exchangeable sensor elements:
Purchase a fully calibrated replacement sensor which can be put into operation with a single command and which immediately complies with specifications. Replacing the sensor is also an option for models with enhanced or highest accuracy (EA/DA). The required correction values are listed on the included certificate. Exchanging the sensor element helps prevent down times and renders your measurement almost interruption free.
Accuracy
Each transmitter can be delivered with one of three accuracies which are:
SA: Standard accuracy of 2.5% RH / ±0.3°C
EA: Enhanced accuracy of ±1.8% RH / 0.2°C (includes factory issued certificate of calibration)
DA: Highest accuracy of ±1.5% RH / ±0.1…0.2°C (includes DAkkS certificate)
Connectivity Options
Currently available in our online shop are three options each with 2m or 5m connection cables, either with open ends or with a USB-A plug:
MODBUS probe with 10V analogue output
MODBUS probe without analogue output
ASCII probe without analogue output
However, we do offer other combinations of analogue outputs, e. g. 0…1 / 2.5 / 5 / 10 V, and cable lengths. Please find more information in the data sheet [1.210 KB]
or directly contact our DKRF500 HumiProbe sales expert!
The cable between sensor head and transmitter housing is 1.5m and made of PFA for operation in surrounding conditions of up to 120°C.
